BC LITHIUM 7000 - MAIN FEATURES:
BC LITHIUM 7000 7A Digital/LCD Battery Charger and Maintainer, Battery Tester
Dealer Product Code: 700BCL7000
- 100% Made in Italy, 3 year guarantee.
- For ALL types of latest generation 12 V lithium batteries with both lithium ion and LiFePO4 technology, from 1.2 Ah up to 100 Ah (e.g. Skyrich)
- SAFE. No sparks. Protections against: reverse polarity, short circuit, overcharging, overheating.YOU DO NOT HAVE TO DISCONNECT THE CAR BATTERY! DO NOT REMOVE THE BATTERY CAPS. ALWAYS LEAVE IT CONNECTED FOR ENTIRE MONTHS.
- Technology recommended by the best manufacturers of diesel, petrol and hybrid motorbikes and cars up to 5000 cc
- TESTER MODE to check: battery charge and discharge status, and correct operation of the alternator/regulator on the vehicle.
- Charging and maintenance algorithm100% AUTOMATIC with 7 CYCLESINTELLIGENT: initialization, recovery (from 1.25V), light charge, main charge, analysis, maintenance and equalization.< /li>
- Increase your battery life up to 4 times. MAXIMUM EFFICIENCY, minimum energy consumption (maximum 2 euros per year of energy on the bill for continuous use of 365 days / 24 hours).
Thanks to the collaboration with main car manufacturers, our products are tested and approved for use on all car brands in circulation (Abarth, Acura, Alfa Romeo, Audi, Bentley, BMW, Bugatti, Buick, Cadillac, Chevrolet, Chrysler, Citroën, Dacia, Daihatsu, Dodge, Ferrari, Fiat, Ford, Honda, Hyundai, Infiniti, Jaguar, Jeep, Kia, Lada, Lamborghini, Lancia, Land Rover, Lexus, Lotus, Maserati, Mazda, Mercedes-Benz, Mini, Mitsubishi, Nissan, Opel, Peugeot, Pontiac, Porsche, Proton, Renault, Rolls-Royce, Saab, Seat, Škoda Auto, Smart, Subaru, Suzuki, Tata , Toyota, Volkswagen, Volvo).
Furthermore, the current market trend is to replace vehicles powered by diesel or petrol with new fuel systems with a lower environmental impact (hybrid vehicles). Our battery chargers and maintainers are perfectly compatible with both traditional fuel vehicles (Diesel, Petrol, CNG, LPG) and mixed fuel vehicles (hybrid vehicles, e.g. petrol + electric)
They are equipped with a cable with eyelets that we recommend installing permanently on the battery in order to make connecting the product to the battery convenient and quick.
With an elegant and compact design, with a very sturdy shell that prevents slipping and makes it resistant to scratches, falls, accidental crushing, UV rays and water (IP44), the product is perfect for being used in any circumstance and occasion.
BC LITHIUM 7000 - WHAT THE ADVANTAGES
Our products, if left connected continuously or if at least maintenance is carried out on the battery on a monthly basis (complete recharging), are able to increase the life of the battery itself by up to 4 times. On average a battery has an expected life of 2 years, with the BC Battery Controller battery chargers and maintainers it is possible to have batteries that have a charge and a useful life of up to 8 to 10 years. They do not cause any electronic compatibility problems with any make and model of machine.
PACKAGE CONTENTS
• 1 BC LITHIUM 7000 battery charger and maintainer
• Cable with eyelets with protection fuse
• Cable with terminals
• Complete instructions
BC LITHIUM 7000 - DETAILED FEATURES
BC LITHIUM 7000 is an intelligent battery charger and charge maintainer with its maximum charging current of 7 Amp, it is designed for perfect and complete maintenance of all latest generation 12 V lithium starter batteries (lithium ions & LiFePO4) from 1.2 Ah up to 100 Ah.
The BC Battery Controller products recharge the battery much more quickly than traditional battery chargers.
The BC LITHIUM 7000 model performs the function of a battery and alternator tester and is able to rehabilitate sulphated batteries , recover 1.25V batteries (the lowest level on the market) and is also designed for use on vehicles equipped with "micro-hybrid" start/stop systems.
Thanks to its system spark-proof (anti-spark) and its protections against overloads, polarity inversions and short circuits. BC LITHIUM 7000 ensures a high level of protection. It has been tested on all brands of motorcycles and scooters, guaranteeing absolute compatibility with the electronic system. of every motorbike/scooter.
Also equipped internally with a cutting-edge microprocessor, the product is able to guarantee extreme efficiency in charging the battery and reduce power consumption to a minimum. energy.
The battery chargers and maintainers of the BC Battery Controller range, being completely automatic, can be left connected to the battery 24 hours a day / 7 days a week for entire months, even for years, completely safely.
With an elegant and compact design, with a very sturdy shell that prevents slipping and makes it resistant to scratches, falls, accidental crushing, UV rays and water (IP44), the product is perfect for being used in any circumstance and occasion.
Inside the package there are convenient pliers and practical mounting eyelets to be left connected to the vehicle.
Also equipped with an intuitive LCD display where it is possible to see real time information on the battery voltage and charging cycle every 10 seconds, perfect night vision is also ensured thanks to its backlighting!
The product comes with a 3-year warranty and premium assistance directly in the factory, given the very few cases handled.
CHARGING ALGORITHM - CHARGING PROGRAM
The battery charger is equipped with an internal microprocessor which checks the battery status in real time and carries out 8 charging cycles autonomously.< br> • Phase 1 - Initialization: checks that the battery is in optimal condition to be recharged/recovered by ensuring that there are no short circuits between one or more battery cells.
Thanks to an integrated sensor that measures the ambient temperature: at low temperatures (< 5°C) the charging current is limited, the POLAR MODE safe charging mode is automatically activated.
• Phase 2 - Recovery: if the battery is in an extreme discharge condition (starting from 1.25V), the device tries to perform a recovery in order to bring it to higher voltages, compatible with the next phase.
• Phase 3 - Light Charge: if the battery is very discharged, the device supplies a light pulsed current to allow the battery to overcome the critical phase.
• Phase 4 - Main Charge: during this phase the battery can recover up to 85-90% of its capacity, thanks to the battery charger's ability to supply full current.
• Phase 5 - Battery Analysis: the device interrupts the supply of current for a few tens of minutes and checks that the battery is able to conserve the charge received during previous cycles.
This phase is repeated periodically at regular intervals.
• Phase 6 - Maintenance: thanks to a specially designed electronic circuit, the device maintains the battery charge during periods of non-use, without overheating, overcharging and water loss /electrolyte.
• Phase 7 - Equalization: this phase is performed every 30 days in order to rebalance the battery cells, thus avoiding electrolyte stratification phenomena.
BC LITHIUM 7000 - FEATURES
• 8-cycle charging algorithm suitable for all types of 12 V lithium batteries, both lithium ion and LiFePO4, from 1.2 Ah up to to 100 Ah.
• Backlit LCD display for perfect night vision (even in the distance), which indicates: the charging cycle in progress (Charge, Maintenance...), the voltage of battery (internal digital voltmeter) and any possible malfunction (pole reversal, short circuit, battery not connected...).
• Real-time monitoring of battery parameters during all charging cycles.
• Protection battery overcharge: activates when the internal microprocessor detects a voltage higher than a pre-established value; no risk of bubble formation for all batteries on the market.
SAFETY
1. Protection against battery pole reversal.
2. Protection against short circuit ( also permanent).
3. Protection against overheating: the current supplied is automatically limited in the event of excessive heating of the device.
Technical Sheet:
Input Voltage: 220÷240V ac, 50-60Hz
Charging Voltage: 14.2V - nom. 12V
Charging current: 7 A max
Operating temperature: -20°C - +50°C
Dimensions: 160 x 85 x 60 mm