BC 5000 EVO+ - MAIN FEATURES:
Dealer Product Code: 700BC5000EP
- 100% Made in Italy, 5 year guarantee.
- 3 PROGRAMS: CAR for car batteries (max charging current: 5 Amp), BIKE for motorcycle batteries (max charging current: 1 Amp ), START&STOP for AGM/EFB batteries (maximum charging current: 5 Amp). TESTER MODE to check: battery charge and discharge status, and correct operation of the alternator/regulator on the vehicle.
- For ALL types of traditional 12 V batteries, from lead-acid to AGM, from 1.2 Ah up to 160 Ah.
- SAFE. YOU DO NOT HAVE TO DISCONNECT THE CAR BATTERY! DO NOT REMOVE THE BATTERY CAPS. ALWAYS LEAVE IT CONNECTED FOR ENTIRE MONTHS. No leakage or reduction of the liquid in the battery (electrolyte). No sparks. Protections against: polarity reversal, short circuit, overcharging, overheating.
- Technology recommended by the best manufacturers of diesel, petrol and hybrid motorcycles and cars up to 5000 cc
- Charging and maintenance algorithm100% AUTOMATIC with 8 CYCLESINTELLIGENT: initialization, recovery (from 1.25V), light charge, main charge, desulfation, analysis, maintenance and equalization .
- Increase your battery life up to 4 times. MAXIMUM EFFICIENCY, minimum energy consumption (maximum 2 euros per year of energy on the bill for continuous use of 365 days / 24 hours).
- The automatic charging and maintenance algorithm provides for automatic temperature compensation, in other words the battery charger determines the ideal charging curve based on the temperature detected in the surrounding environment
Thanks to the collaboration with main car manufacturers, our products are tested and approved for use on all car brands in circulation (Abarth, Acura, Alfa Romeo, Audi, Bentley, BMW, Bugatti, Buick, Cadillac, Chevrolet, Chrysler, Citroën, Dacia, Daihatsu, Dodge, Ferrari, Fiat, Ford, Honda, Hyundai, Infiniti, Jaguar, Jeep, Kia, Lada, Lamborghini, Lancia, Land Rover, Lexus, Lotus, Maserati, Mazda, Mercedes-Benz, Mini, Mitsubishi, Nissan, Opel, Peugeot, Pontiac, Porsche, Proton, Renault, Rolls-Royce, Saab, Seat, Škoda Auto, Smart, Subaru, Suzuki, Tata , Toyota, Volkswagen, Volvo).
Furthermore, the current market trend is to replace vehicles powered by diesel or petrol with new fuel systems with a lower environmental impact (hybrid vehicles). Our battery chargers and maintainers are perfectly compatible with both traditional fuel vehicles (Diesel, Petrol, CNG, LPG) and mixed fuel vehicles (hybrid vehicles, e.g. petrol + electric)
They are equipped with a cable with eyelets that we recommend installing permanently on the battery in order to make connecting the product to the battery convenient and quick.
With an elegant carbon effect design, with a very sturdy shell that prevents slipping and makes it resistant to scratches, falls, accidental crushing, UV rays and water (IP44), the product is perfect for being used in any circumstance and occasion.
BC 5000 EVO+ - WHAT THE ADVANTAGES
Our products, if left connected continuously or if at least maintenance is carried out on the battery on a monthly basis (complete recharging), are able to increase the life of the battery itself by up to 4 times. On average a battery has an expected life of 2 years, with the BC Battery Controller battery chargers and maintainers it is possible to have batteries that have a charge and a useful life of up to 8 to 10 years. They do not cause any electronic compatibility problems with any make and model of machine.
BC 5000 EVO+ - WHICH BATTERIES FOR
All the battery chargers/maintainers in the BC Battery Controller range are entirely produced in Italy and therefore 100% Made in Italy, of the latest generation and among the most safe and advanced on the market. They carry out 8 charging cycles completely automatically and are designed for perfect recovery, charging, desulfation as well as for the very long-term maintenance of starter batteries present in cars, motorcycles, scooters, campers, tractors and gardening vehicles. The BC charging and maintenance technology is also ideal for stationary "home alarm" batteries. In fact, they can be left connected 365 days a year and in this case involve a consumption of a maximum of 2 euros of electricity in case of continuous use.
Although "deep-cycle" batteries are usually used with 24/48/60/80V systems, BC Battery battery chargers and maintainers are perfect for the maintenance of traction batteries (also called deep cycle), provided that each 12V bank is recharged separately (and it is not necessary to separate the battery groups connected together), just leave the BC connected directly to a 12V battery.
PACKAGE CONTENTS
• 1 BC 5000 EVO+ battery charger and maintainer
• Cable with eyelets with protection fuse
• Cable with terminals
• Complete instructions
BC 5000 EVO+ - DETAILED FEATURES
BC 5000 EVO+ is a battery charger and charge maintainer which, thanks to its 3 selectable programs (CAR, BIKE and START&STOP), is designed for perfect and complete maintenance of all traditional 12 V batteries (lead-acid & AGM) from 1.2 Ah up to 160 Ah.
For the CAR and START&STOP charging programs the device delivers a maximum current of 5Amp, whereas in the BIKE program (for motorcycles) the current delivered is equal to 1 Amp.
The BC Battery Controller products recharge the battery much more quickly than traditional battery chargers.
The BC 5000 EVO+ model performs the function of a battery and alternator tester, and is able to restore batteries sulphated, recover 1.25V batteries (the lowest level on the market) and is also designed for use on vehicles equipped with "micro-hybrid" start/stop systems.
Thanks to its spark-proof system ( anti-spark) and its protections against overloads, polarity inversions and short circuits. BC 5000 EVO+ ensures a high level of protection. It has been tested on all car brands guaranteeing absolute compatibility with the electronic system of every car.
Also equipped inside with a cutting-edge microprocessor, the product is able to guarantee extreme efficiency in recharging the battery and reduce energy consumption to a minimum.
The battery chargers and charge maintainers from the BC Battery Controller range, being completely automatic, can be left connected to the battery 24 hours a day / 7 days a week for entire months, even for years, completely safely.
Inside the package are present of comfortable pliers and practical mounting eyelets to be left connected on the vehicle.
Also equipped with an intuitive LCD display where it is possible to see information on the battery voltage, charging cycle and selected program in real time every 10 seconds ( CAR, BIKE or START&STOP) perfect night vision is also ensured thanks to its backlighting!
The product comes with a 5-year warranty and premium assistance directly in the factory, given the very few cases handled.
CHARGING ALGORITHM - CHARGING PROGRAM
The battery charger is equipped with an internal microprocessor which checks the battery status in real time and carries out 8 charging cycles autonomously.< br> • Phase 1 - Initialization: checks that the battery is in optimal condition to be recharged/recovered by ensuring that there are no short circuits between one or more battery cells.
• Phase 2 - Recovery: if the battery is in an extreme discharge condition (starting from 1.25V), the device tries to perform a recovery in order to bring it to higher voltages, compatible with the next phase.
• Phase 3 - Light Charge : if the battery is very discharged, the device supplies a light pulsed current, to allow the battery to overcome the critical phase.
• Phase 4 - Main Charge: during this phase the battery can recover up to 85-90%. % of its capacity, due to capacity of the battery charger to deliver full current.
• Phase 5 - Desulfation/Absorption: in this phase, in order to restore the remaining 10-15% of the battery capacity, the device provides a "controlled overcharge" through the desulfation/recovery of the lead cells -acid (for mild or medium sulfation levels).
• Phase 6 - Battery Analysis: the device interrupts the power supply for a few tens of minutes and checks that the battery is in able to conserve the charge received during previous cycles.
This phase is repeated periodically at regular intervals.
• Phase 7 - Maintenance: thanks to a specially designed electronic circuit, the device maintains the battery charge during periods of non-use, without overheating, overcharging and water loss /electrolyte.
• Phase 8 - Equalization: this phase is performed every 30 days in order to rebalance the battery cells, thus avoiding electrolyte stratification phenomena.
BC 5000 EVO+ - FEATURES
• Three selectable charging programs: "CAR MODE" for car batteries, "START&STOP" for batteries installed on vehicles with start&stop system and " BIKE MODE" for motorcycle batteries.
• Backlit LCD display for perfect night vision (even in the distance), which indicates: the active charging program (CAR or BIKE or START&STOP), the charging cycle in progress (Charging, Desulfation, Maintenance...), the battery voltage (internal digital voltmeter) and any possible malfunction (pole reversal, short circuit, battery not connected...).
• Multi-language software: the user can set the display language between Italian, French, English, German, Spanish or Portuguese.
• Real-time monitoring of battery parameters during all cycles charging.
• Battery overcharge protection: activates when the internal microprocessor detects a voltage higher than a pre-established value; no risk of bubble formation for all batteries on the market (including MF and Gel).
• Tester function: the device will independently carry out the following checks in the sequence shown below:
1. Voltage test at battery rest (including estimation of its charge level);
2. Battery inrush test while starting the vehicle;
3. Test of the vehicle charging system (alternator/regulator).< br>
SAFETY
1. Protection against battery pole reversal.
2. Protection against short circuit (even permanent).
3. Protection against overheating: the current supplied is automatically limited in case of excessive heating of the device.
Technical Sheet:
Input Voltage: 220÷240V ac, 50-60Hz
Charging Voltage: 13.8V/14.4V - nom. 12V
Charging Current: 1 A max (Bike) / 5 A max (Car/Start&Stop)
Operating temperature: -20°C - +50°C
Dimensions: 177 x 127 x 70 mm